Circular technology · Resource recovery · Intelligent integration

Bringing resources
back into circulation.

From industrial waste liquids to recovered resources, we connect chemical treatment,
metal recovery and intelligent control to explore new possibilities for your process.

Explore solutions↗See our process ↓
01 /Industrial wastewater treatmentIndustrial wastewater treatment
02 /Metal resource recoveryMetal resource recovery
03 /Process automationProcess automation
Solutions

Start with the process.
Find the next life for resources.

Every waste stream requires a different approach.
We assess feed characteristics, equipment and operating controls to develop a process suited to your site.

01 /

Treatment & volume reduction

Treatment & volume reduction

We assess chemical coagulation, solid–liquid separation and vacuum drying based on waste composition, planning equipment from pretreatment through concentration and volume reduction.

Chemical coagulationFilter press separationVacuum drying
02 /

Nickel recovery R&D

Nickel recovery R&D

Focusing on spent electroless nickel baths, we investigate recovery efficiency, product quality and reuse feasibility using dedicated reagents and functional plates.

Spent plating bathsChemical extractionResource reuse
03 /

Automation & traceability

Automation & traceability

We connect sensors, PLCs and operator interfaces for on-site control, with batch records and material tracking to support process improvement.

Automatic dosingEquipment controlBatch tracking
Projects

From technical concepts
to real-world applications.

Waste resource recovery, treatment equipment and online monitoring.
Explore practical applications through our project images.

Image captions retain the original Chinese / English artwork. Translated project information is provided below.

01 /

Electroless nickel waste recovery & final treatment

83.8%Nickel content in the recovered product

Equipment for electroless nickel waste recovery connects metal recovery with subsequent treatment. The supplied project material reports a nickel content of 83.8% in the recovered product.

This is the nickel content of the recovered product, not the recovery rate of nickel from the feed.

Discuss a similar project ↗
02 /

Waste sulfuric acid recovery system

Waste acid reuseLow-concentration waste sulfuric acid recovery

We explore resource recovery pathways for low-concentration waste sulfuric acid, including its reuse in chemicals such as aluminum sulfate.

The project image includes a carbon footprint figure. Refer to the full assessment for its system boundary and units.

Discuss a similar project ↗
03 /

High-concentration nitrate-nitrogen treatment

No dilutionDirect treatment of concentrated waste liquids

This project addresses waste liquids with high nitrate-nitrogen concentrations and shows the on-site equipment and resulting solid products.

Applicable concentrations and operating conditions depend on feed analysis and testing.

Discuss a similar project ↗
04 /

Online monitoring of anodizing electrolytes

24 hoursReal-time monitoring

On-site equipment and an HMI display the operating status of the anodizing electrolyte system to support operation and monitoring.

Monitoring parameters and control functions depend on the installed system.

Discuss a similar project ↗
View the complete technical services overview＋
Our process

A clear treatment pathway.
A next destination for resources.

From sample analysis to recovery validation, we establish technical conditions step by step.
The actual process depends on water quality, treatment targets and site conditions.

01 /

Feed characterization

Measure metal concentrations, pH and components affecting treatment to establish the assessment baseline.

02 /

Treatment process design

Evaluate reagents and reaction conditions through testing, integrating separation and volume reduction.

03 /

Recovery & quality validation

Analyze recovered products and treated water, reviewing the material balance and potential reuse.

04 /

Data recording & tracking

Link feed receipt, operating batches, recovered products and destinations in verifiable records.

Data recording & trackingTurn each operating batch into evidence for the next improvement.
About us

Engineering creates value
when it makes change happen.

ClarHarmony Tech Inc. focuses on industrial waste liquid treatment and metal recovery. From chemical reactions and equipment to automation, we connect resource circulation with practical operations.

Starting with process conditions, we use trials, analysis and records to assess scale-up and long-term operation.

  • Built on feed analysis↗
  • Designed for site conditions↗
  • Improved through data↗
Project inquiry

Your treatment challenge
is our starting point.

Summarize your waste type, daily treatment volume and targets
to make the next technical discussion more specific.

Enter your company details, contact method and requirements to prepare a complete project brief.

Provide at least one contact method: phone, email, LINE, WeChat or WhatsApp.

Downloading creates a file on your device only. Emailing passes the entered information to your email app.

Gmail can prefill a draft. iCloud, QQ, Outlook and NetEase open the mailbox; copy the details below into a new message. For company Exchange, use your configured default email app. Confirm sending in your email service.

Projects

Project equipment and informationOpen original image ↗